ICM Photography Part II

It’s been a while since I updated everyone on how my ICM (Intentional Camera Movement) is coming along, so here we go. It’s slow going. I’ll take a hundred shots and not use a single one. Sometimes processing with take ten minutes, sometimes ten hours. But it is nothing if not rewarding.

I had been envisioning this image for quite a while, but it took me two or three trips to get just right. This is looking towards the Harbour Bridge in Sydney from the Circular Quay Ferry Terminal. You can see the red and white pylon marker on the left, the iconic yellow and green of the ferry to the upper right. What I like most is the texture, which comes across as a mix between pencil and watercolour.

All of my ICM images to date have featured Sydney. I’ve tried not to rush it and focus on the really iconic parts of the harbour city. It really is a trial and error process, and I’ve come to learn there is actually a lot of technique to the initial capture. It is all about the movement of your wrist motion—the speed, amount of push and pull, spin… It’s not just shaking your camera around in the air, though that can also lead to a good result from time to time. Experimentation is key.

A GIF showing the build-up of this image in post-processing. It’s quite layer intensive, as you can see.

The other important element to making ICM work is to have a defined idea of not only what you want to shoot, but some idea of the composition. I find if I show up somewhere without having thought it through it leads to a scattered approach that doesn’t have a strong sense of composition, which is everything with images like this. At the least, you need a vague idea of where major focal points will be placed in the image before you ‘shoot’.

The Queen Victoria Building in Sydney. You can see the façade of the building in the back, the statue of Queen Victoria to the left and one of Sydney’s new trams moving through the bottom of the image.

I feel like I’m starting to get my own feel as far as ICM images go. Something that has started to change is my use of colour. I’m pushing saturated colour far more than my original images, as you can see in the image of the QVB building above. I’m a big fan of paintings featured strong, vibrant colours, so I expect to see that filter through to my ICM photography as I start to improve and get more confident.

The famous Coca Cola sign at Kings Cross, Sydney. This one took a long time to put together over several weeks and was originally different colours completely, though I felt they made it hard to gauge the subject matter.

Things don’t always go to plan. I had this image in my head of looking up the road towards the Coca Cola sign at Kings Cross, now something of a historic monument, but when I got there I found there were too many trees and clutter obstructing the view, so I had to get much closer than planned. In the end it worked out, as above, but it was certainly frustrating at the time.

Hours and hours spent in Photoshop were required to get this particular image working. Sometimes when you’re not feeling something the best thing to do is simply walk away, which I did… several times over several weeks.

One final piece of advice, for the love of god make sure you correct for dust on the base image before duplicating it and playing around. I often get too excited and forget this basic first step. It means I end up with twenty layers in twenty different orientations and two specks of dust turning into two-hundred. Don’t be like me. Make sure you have a clean file to begin with.

I understand these images are not for everyone. They border on the truly abstract and venture far from traditional photography, but I’m enjoying myself, happy with the results and that should really be all that matters.

A Guide To ICM Photography

I have been getting quite experimental with my photography this year and recently stumbled upon ICM, or Intentional Camera Movement photography. I fell into the work of photographer Andy Gray and was immediately blown away by the painterly feel of his images.

An ICM photo of Hornby Lighthouse in Sydney, Australia, my first attempt at the technique.

Thankfully, Andy has a wonderful YouTube channel where he breaks down step-by-step his entire process, from capture to post-processing. I definitely recommend checking it out to see just how much work goes into each image.

An ICM photo of the Sydney Opera House. Another ICM image of poppies from the Botanic Gardens has been used as a second exposure layered over the first.

What’s required? Well, a camera, though megapixels don’t really matter given the abstract nature of the finished product, and also an ND filter. It seems something between a 6-stop and a 10-stop is what work’s best, allowing exposures within the 0.5-1.5sec  range during the middle of the day. If you wanted to skip the filter, I suppose you could shoot closer to sundown and sunrise where the exposures would be longer handheld. Like everything with this technique, however, there are no hard and fast rules. It is all about experimentation.

I opted for a 6-stop in 77mm to suit my Sigma 50mm f1.4 and also 24mm 1.4, a wider lens being the preferred option. At around $100 AUD, it’s not a terribly expensive way to get into ICM, plus you can use the filter for more traditional purposes.

The Sigma SD-H itself probably isn’t the best choice of camera. It buffers slowly and the RAW files are tedious to process when you get back home, requiring you to be somewhat picky when it comes to post-processing. Expect to take a lot of photos.

Another ICM image of Hornby Lighthouse. This one reminds of the famous aerial shots of Shark Bay in Western Australia

As for the process, if you watch Andy’s videos you’ll get an idea of the movement required. I set f11 and around 0.5sec, starting with a shaking motion and then a longer, whipping motion. I slowly worked up to longer exposures, trying to follow lines within the scene. It’s very much like painting… with a very expensive brush.

If there are people around, note this: You are going to look like an absolute idiot. One guy suggested ‘I don’t think that’s how you use a camera, mate’. I simply smiled back, not able to dial up a suitable comeback in time. I found the best results were when I really got into it, almost violent in the movement in able to create the required textural effect.

It’s also important you start with a regular composition in mind, just as you would if you were taking a traditional landscape. You need a prominent feature or point of interest the abstraction works around. So, frame up the scene as would normally and then go to town. I don’t have any castles or ruins nearby like Andy, but I do have Sydney Harbour and its many wonderful icons.

Another important point is to beware of highlights. It was an extremely bright day when I first tried this. Any small highlight source within the frame can easily ruin a shot by basically slicing it up with pure white. It’s a little hard to explain, but if you think you see specular highlights that are going to be blown out, avoid them in your movement.

This animation shows how the image at the top of this post was created using layers within Photoshop.

Into post-processing and I simply looked for frames that stood out where the movement seem right and balanced, or the texture was right. From there it’s into Photoshop, stacking up the layers and running through masks and blend modes to find an initial base to work from.

Once the initial image has started to come together, it’s into Analog Efex Pro 2. Here, Andy uses a variety of tools to help further abstract and shape the image, but notably vignette, double exposure (inverting the image) and film effects. I found it also helped scrolling through the factory camera presets within Analog Pro 2 to see if anything worked, especially the ‘Motion’ cameras. Andy also uses Vivuza for spot adjustments, but I didn’t feel the need myself. As they say, there are lots of ways to skin the cat in Photoshop.

I think of post-processing in two parts: Colour and contrast, effectively leaving colour until last. I tried a curves layer first, adjusting RGB channels individually, but I couldn’t seem to make it work. Instead, I loaded up a LUT adjustment layer and simply scrolled through all the LUTs I have on file (which is quite a few) until I found something I liked and adjusted opacity from there. The Selective Color and Hue/Adjustment layers were good for fine-tuning.

Finally, I let the images sit there for days at a time, slowly tweaking until I thought they were good enough. It’s very easy to get stuck in a kind of ‘post-processing loop’ with these sorts of images, constantly adding and removing adjustment layers and masks, tweaking and tweaking and circling back on yourself. When I found myself doing this, I would turn off all layers except for the base exposure and add them back one by one adjusting as I went.

View fullsize

View fullsize

View fullsize

The above images show the interesting detail when seen at 100%.

Overall, I think I’m pleased with the results, though they are not what I expected at all. That’s the beauty of a style like this: You don’t know what you’re going to get. I’d love to make some prints and really study them.

I will say it was extremely frustrating at times. The images took a lot longer to process than usual largely in part because so much trial and error is required. It is rewarding, though, when you finally have something on screen that doesn’t look like a dog’s breakfast.

If you’d like to support Andy and his channel, you can do so here. Look out for more ICM work in the future.

An abstract view of Sydney Harbour created using the Intentional Camera Movement technique. Note what happened with the specular highlights on the water in the bottom right, but in this case I think it works.